Maintenance of SF6 Gas

Sulphur hexafluoride (SF₆) gas is an arc quenching and cooling medium used in medium and high voltage electrical equipment as an electrical insulator. Under the Kyoto Protocol, SF₆ has been classified as a greenhouse gas and restrictions are in place to limit the amount allowed to be released into the atmosphere.

Both manufacturers and the users of their equipment are responsible for the reduction in SF₆ gas emissions. Organisations such as the International Electrochemical Commission (IEC) and the International Council on Large Electric Systems (CIGRE) provide guidance and regulatory information with regards to the handling of such a gas when it comes to maintenance.

When partial arcing or a failure occurs within electrical equipment, this can cause the creation of decomposition products such as sulphur dioxide and hydrogen fluoride. Analysis of SF₆ gas is recommended as part of a regular condition maintenance schedule, this ensures that equipment and personnel are properly protected. Early identification of elevated decomposition products will help to eliminate power outages and failures, alongside unnecessary inspections.

In order to ensure that no emissions occur throughout the testing process, Cambridge Sensotec designed the Rapidox SF₆ 6100 Pump Back gas analyser. The instrument draws a sample of SF₆ gas from the electrical equipment and analyses it in accordance with current IEC and CIGRE test configurations. It then pumps it back either automatically or manually, into the electrical equipment at pressure. Alternatively, the analyser can store the gas internally for proper disposal at a later time.

For further information about gas analysis applications or the Rapidox range of gas analysers, please contact us on +44 (0)1480 462142 or email info@cambridge-sensotec.co.uk. Additional information on SF6 gas analysis can be found at www.sf6.co.uk.

Additional News

Our stockist Oldham Gas who we have supported for the last ten years, has combined expertise in the field of gas and flame detection with Detcon, Simtronics, Gas Measurement Instruments (GMI) and the gas and flame division of Scott Safety to create a new entity, Tyco Gas & Flame Detection.